What kind of oil goes in the rear end of a Polaris Ranger?
“The rear differential is Full Synthetic GL-5 Hypoid Gear oil. Any Full Synthetic 75w90 GL-5 gear oil can be used.
What kind of gear oil does a Ford Ranger take?
Viscosity: SAE 75W-90. Oil Base: Synthetic. Oil Type: API GL-5/Dexron. Volume: 1 Quart.
What oil goes in a Polaris Ranger front differential?
There is only one oil that Polaris approves for use in your Ranger front drive – Polaris Demand Drive Premium LT Hub Oil. This is the common oil sold in Polaris dealers and is the only certified oil Polaris will recommend.
What is Polaris angle drive fluid used for?
– Description. Angle Drive Fluid Advantage: Polaris Angle Drive Fluid is a high-quality lubricant designed for Polaris ORV rear final drives to maintain peak performance longer than standard automotive or aftermarket differential fluids.
What kind of differential fluid does the Ford Ranger use?
Use hypoid gear lubricant SAE 80W or 90W. On models with the front locking differential, add 2oz of friction modifier. On models with the rear locking differential use only locking differential fluid part No. ESP-M2C154-A or it’s equivalent, and add 4oz of friction modifier. The FX4 Level II Ford Ranger calls for 75W-140 synthetic lubricant.
What kind of gear oil to use in a Ford Ranger?
You can use Mobil 1 Synthetic Gear Lube 75W-140 LS. It contains special friction modifiers designed for limited slip-type differentials (traction lok in Ford speak). If it is a non posi rear, than use Castrol 90-120 gear oil or equivalent and no friction modifier is needed. Wow.So cobra.Very Ranger. it took 2 quarts to fill it up.
What is the Ford Ranger FX4 Level 2 oil type?
The FX4 Level II Ford Ranger calls for 75W-140 synthetic lubricant. The fluid level in the drive axles should be checked at each oil change. Like the manual transmission which is available, the rear axle does not have a dipstick to check fluid level.
Where is the rear axle fluid dipstick on a Ford Ranger?
Like the manual transmission which is available, the rear axle does not have a dipstick to check fluid level. Instead, a filler plug is located in the side of the housing (or in the side of the cover), at a level just barely above the level to which fluid should fill the housing. To Check The Fluid Level: