What is CP210x VCP driver?
The CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a Virtual COM Port to facilitate host communication with CP210x products. These devices can also interface to a host using the direct access driver.
What is a CP210x USB to UART bridge?
The CP2102 USB to UART Bridge provides a complete plug and play interface solution that includes royalty-free drivers. This USB 2.0 compliant device includes 0 digital I/O pins and is availble in a 5×5 mm QFN28 package.
How do I know if my CP210x driver is installed?
First, go to the Windows Start button, and find the Run option.
- Type DEVMGMT.
- You will get a list of devices attached to your computer.
- If you see Silicon Labs CP210x USB to UART Bridge listed in the Ports section of the Device Manager, you have the correct device driver installed.
What is VCP driver Mac?
The Silicon Labs CP210x Mac OS X Virtual COM Port (VCP) driver creates a standard ‘tty’ serial port on the Mac. The port is named ‘/dev/tty. SLAB_USBtoUART’. This port can be used just like any standard hardware serial port.
What is USB VCP?
Allows the host PC to connect to a USB port, but communicate with an application via a COM port. This facilitates bi-directional communication. A driver will be loaded on the host PC. The application can send characters to the screen and also commands to clear or otherwise control the screen.
What is VCP installer?
Description. With VCP Installer App you can install a configuration package in dormakaba door components using the smartphone. For communication, interfaces such as Bluetooth Low Energy (BLE) or Near Field Communication (NFC) are used.
What is UART driver?
A UART is used to translate data between the chip and a serial port. The UART driver simplifies reading and writing to any of the UART peripherals on the board, with multiple modes of operation and performance. These include blocking, non-blocking, and polling, as well as text/binary mode, echo and return characters.
How do I install a VCP driver?
Copy the file VCP driver. zip on your PC and extract it using the password abc. Switch from RS to USB in the System settings /RS232 settings of your device. Connect the titrator or piston burette with a suitable USB cable to a free USB port of your computer.