What does Gtsio 520 mean?
These prefixes are additive, so a GTSIO-520 is a geared, turbocharged, injected, opposed, 520-cubic-inch engine. Suffixes to the displacement denote variations of the type.
What is Tsio engine?
Base TSIO-360 model: a six-cylinder air-cooled, horizontally opposed direct drive, fuel injected, tuned induction, turbocharged engine with internal piston cooling oil jets. TSIO-360-AB. 210 hp (157 kW) at 2800 rpm, Minimum fuel grade 100 or 100LL avgas, compression ratio 7.50:1.
How much does a Continental IO 520 weight?
The TSIO-520-N, -NB engines have a 520 cubic inch displacement achieved by using a cylinder design with a 5.25 inch diameter bore and a 4.00 inch stroke. The engine enclosure is of the Permold series crankcase design. The dry weight of the engine is 404 lbs.
What is a piston plane?
Piston airplanes have one or more piston-powered engines connected a propeller to provide thrust to move the aircraft on the ground and through the air. Piston-powered aircraft most commonly use 100 octane low-leaded fuel and fly at altitudes below 15,000 feet.
How fast does a turboprop plane fly?
In contrast to turbofans, turboprops are most efficient at flight speeds below 725 km/h (450 mph; 390 knots) because the jet velocity of the propeller (and exhaust) is relatively low.
What is aircraft compression ratio?
In aeronautical engineering, overall pressure ratio, or overall compression ratio, is the ratio of the stagnation pressure as measured at the front and rear of the compressor of a gas turbine engine. The terms compression ratio and pressure ratio are used interchangeably.
How does a Cessna engine work?
The blades spin at high speed and compress or squeeze the air. The compressed air is then sprayed with fuel and an electric spark lights the mixture. The burning gases expand and blast out through the nozzle, at the back of the engine. As the jets of gas shoot backward, the engine and the aircraft are thrust forward.
What are aircraft pistons made of?
Piston Construction The majority of aircraft engine pistons are machined from aluminum alloy forgings. Grooves are machined in the outside surface of the piston to receive the piston rings, and cooling fins are provided on the inside of the piston for greater heat transfer to the engine oil.
Who made the 360 engine?
The LA engines are a family of pushrod OHV small block 90° V-configured gasoline engines built by Chrysler Corporation. It was factory-installed in passenger vehicles, trucks and vans, commercial vehicles, marine and industrial applications from 1964 through 1991 (318) & 1992 (360).